News

Differences between Carving and Milling Machine and Carving Machine

Differences between Carving and Milling Machine and Carving Machine

2022-07-08 11:01:52

A carving and milling machine is a machine integrating fine carving, cutting, and milling. For example, the three-dimensional carving machine has a large amount of cutting each time, and the 200 mm wide data can be completed at one time. The diameter of the cutter inside the engraving and milling machine is 1mm-16mm, and the length of the cutter is 50-80mm. It can be used flexibly and can be replaced at any time for different operations. Because some machines plan to require heavy loads, high-performance requirements of frame steel, and large z-axis travel, they can not only do the process of small carving machines but also cut thick plates at high speed. Each feed can reach 20-30 mm. If they are replaced by carving machines, they are far from reaching such a level.

 

After carving the plates, the carving machine is widely used in a two-color plate or acrylic carving. The cutting depth of each carving is about 1-3 mm. It is widely used in the manufacture of signs and signs. In terms of mechanical structure, the carving machine has light planning, with fast X and Y movement speed and short z-axis travel, which is suitable for carving 5-8mm data. The carving spindle head is equipped with a spring, which can flatten the thin plate below 3mm in the carving process. The main shaft of the carving is connected to the motor with a large diameter through a belt to accelerate the speed and lubricate the quality of the carved workpiece. The length of the carving tool used is about 15.9 cm, and the diameter is about 4.35 mm. However, due to the impact of planning, it can only be used for high-speed carving process planning with a small cutting volume.

 

carving and milling machine

 

Difference in format

 

Users have always judged carving machines and carving and milling machines from the format. The small format is the carving machine, and the large format is the carving and milling machine, which may be called the carving machine, the carving and milling machine, or the large carving machine. Similarities and differences between carving machines and carving milling machines facing the trust carving machine and carving milling machine, many people do not know their similarities and differences. People usually intuitively feel that the small format is the carving machine, and the large format is the carving and milling machine, which may be called the carving machine, the carving and milling machine, and some even directly call it the large carving machine.

 

Carving and milling machines are two types of machines with different structures, but their working principles are roughly the same. It is driven by the X, y, and Z axes, and then controlled by the electronic controller. In terms of the use and performance of carving machines and carving milling machines, carving machines are mainly used to carve plates. They are widely used in two-color plates or acrylic carvings. Its cutting depth is generally about 1mm-5mm, and it is widely used in signs and signs.

 

Differences in mechanical structure

 

In terms of mechanical structure, the planning of the carving machine is light, the moving speed of the X and Y axes is fast, and the stroke of the Z-axis is short, which is suitable for carving 5mm-8mm data. The spring pressing nose installed in the carving spindle head mainly plays a role in flattening the sheet below 3mm during the early carving process.

 

The carved spindle is connected to a motor with a larger diameter through a belt to increase the speed so that the quality of the carved workpiece is more lubricated. It uses a longer carving tool, with a length of about 15.9cm and a diameter of about 4.35mm. Because of planning constraints, it is suitable for high-speed carving process manufacturing with a small cutting volume.

 

A carving and milling machine can also be understood as fine carving. It can be cut or cut. The cutter diameter standard available for carving and milling machines is 1mm-16mm, and its cutter length is generally about 50~80mm. In this way, we can flexibly use it to do fine work with a thin knife and big work with a thick knife. Because the machine itself pays attention to heavy loads when planning, the frame is rigid and the z-axis stroke is large, so it can not only do the process of small carving machines but also cut thick plates at high speed, which is the process of manufacturing that carving machines cannot do at all.

 

Engraving and milling machine, also known as CNC engraving and milling machine, is a kind of CNC machine tool. Generally speaking, engraving and milling machines are CNC milling machines that use small cutters, and high-power and high-speed spindle motors. The advantage of a carving machine is carving. If the hardness of processing data is relatively large, it will appear powerless. The presentation of carving and milling machines can be said to fill the gap between the two. Engraving and milling machines can carve and milling, which is an efficient and high-precision CNC machine tool.

 

Make a purchase of wood carving milling engraving machine, 3d cnc wood carving services, cnc wood carving service from China, you can get them at a good price if you have a large quantity. We hope to be your long-term partner.

Cuntatta ci
Nome

Nome can't be empty

* E-mail

E-mail can't be empty

telefonu

telefonu can't be empty

Cumpagnia

Cumpagnia can't be empty

* Missaghju

Missaghju can't be empty

Mandate